United States Department of Agriculture
Natural Resources Conservation Service		 Oklahoma Go to Accessibility Information
Skip to Page Content


Oklahoma Standard Drawings

Last Modified: 06/02/2008

The items on this page are intended for use by NRCS employees or other qualified persons only.

To assist in the design of engineering practices, the following standard drawings have been developed.  These drawings can be used as a starting point in developing a set of drawings for a site specific practice design.  These drawings should only be used by engineers and others experienced in conservation practice design.

The following documents require Adobe Acrobat.
Download a file to your workstation prior to use. Right click the link, then select "Save Target As..."

Go to: Transmittal Notices | Drawings | Examples

Transmittal Notices

Notice

Explanation and Attachment

 Date

OK-3 (PDF; 21 KB)

 One new drawing, 35 revised drawings, and 55 examples (PDF; 10.5 MB)                                  05/06

OK-2 (PDF; 19 KB)

 Four new drawings and 12 revised drawings (PDF; 4.3 MB) 12/05

OK-1 (PDF; 26 KB)

 Revised all standard drawings with new drawings (ZIP; 15.8 MB) 08/05

Drawings

Back to Top

Drawing Number

Drawing Title

 Date
-- Standard Drawings Index (PDF; 20 KB) 05/06
OK-DWG-100 Plain Sheet with Title Block (PDF; 13 KB) 04/00
OK-DWG-200 Drop Inlet Structure - Corrugated Metal Pipe (PDF; 554 KB) 07/05
OK-DWG-200a Drop Inlet Structure - Welded Steel Pipe (PDF; 520 KB) 02/06
OK-DWG-201 Drop Inlet Structure - CMP w/ Footing (PDF; 471 KB) 07/05
OK-DWG-201a Drop Inlet Structure - Welded Steel Pipe w/ Footing (PDF; 593 KB) 02/06
OK-DWG-203 Hooded Drop Inlet Structure - Corrugated Metal Pipe (PDF; 438 KB) 07/05
OK-DWG-203a Hooded Drop Inlet Structure - Welded Steel Pipe (PDF; 534 KB) 02/06
OK-DWG-204 Hooded Drop Inlet Structure - CMP w/ Footing (PDF; 479 KB) 07/05
OK-DWG-204a Hooded Drop Inlet Structure - Welded Steel Pipe w/ Footing (PDF; 605 KB) 02/06
OK-DWG-205 Canopy Drop Inlet Structure - CMP (PDF; 589 KB) 07/05
OK-DWG-205a Canopy Drop Inlet Structure - Welded Steel Pipe (PDF; 312 KB) 08/06
OK-DWG-206 Canopy Drop Inlet Structure - CMP w/ Footing (PDF; 758 KB) 07/05
OK-DWG-206a Canopy Drop Inlet Structure - Welded Steel Pipe w/ Footing (PDF; 311 KB) 08/06
OK-DWG-206b Canopy Drop Inlet Structure - CMP w/ Footing and Riprap (PDF; 487 KB) 09/05
OK-DWG-207a Bermless Canopy Drop Inlet Structure - Welded Steel Pipe (PDF; 512 KB) 02/06
OK-DWG-210 Canopy Inlet Structure - Corrugated Metal Pipe (PDF; 367 KB) 07/05
OK-DWG-210a Canopy Inlet Structure - Welded Steel Pipe (PDF; 334 KB) 02/06
OK-DWG-210b Canopy Inlet Structure - PVC Pipe (PDF; 390 KB) 12/05
OK-DWG-212 Horizontal Hooded Inlet Structure - CMP (PDF; 271 KB) 11/04
OK-DWG-212a Horizontal Hooded Inlet Structure - Welded Steel Pipe (PDF; 328 KB) 02/06
OK-DWG-213 Vertical Hooded Inlet Structure - CMP (PDF; 270 KB) 11/04
OK-DWG-213a Vertical Hooded Inlet Structure - Welded Steel Pipe (PDF; 329 KB) 02/06
OK-DWG-214 Embankment Structure (PDF; 467 KB) 07/05
OK-DWG-215 Filter and Drainage Diaphragm (PDF; 67 KB) 01/06
OK-DWG-216 Corrugated Metal Pipe Stiffener Details (PDF; 32 KB) 11/05
OK-DWG-217 Riprap Toe Drain (PDF; 46 KB) 01/06
OK-DWG-220 Connecting Band and Metal Anti-seep Collar Details (PDF; 53 KB) 01/02
OK-DWG-221 Slotted Flange Coupler and Metal Anti-seep Collar Details (PDF; 51 KB) 01/02
OK-DWG-222 Hugger Band Coupler Details (PDF; 46 KB) 03/02
OK-DWG-230 Horizontal Hooded Inlet Details (6" to 48" CMP) (PDF; 94 KB) 03/02
OK-DWG-231 Baffle and Trash Guard Details for Drop Inlet (PDF; 55 KB) 01/02
OK-DWG-231a Trash Guard for Canopy Drop Inlet (PDF; 36 KB) 01/02
OK-DWG-231b Trash Guard for Canopy Drop Inlet w/ Riprap (PDF; 60 KB) 08/03
OK-DWG-232 Rod Trash Guard Detail for Drop Inlet (PDF; 121 KB) 01/03
OK-DWG-233 Debris Guard Detail for Canopy or Hooded Inlet (PDF; 66 KB) 11/04
OK-DWG-300 Concrete Lined Outlet (PDF; 83 KB) 07/02
OK-DWG-300a Concrete Lined Outlet w/ Non-plastic Blanket (PDF; 87 KB) 12/02
OK-DWG-301 Gabion Mattress (PDF; 120 KB) 07/02
OK-DWG-302 Fabricated Corrugated Galvanized Steel Toewall Drop Spillway (PDF; 239 KB) 02/02
OK-DWG-302a Fabricated Corrugated Galvanized Steel Toewall Drop Spillway w/ Riprap Outlet (PDF; 272 KB) 02/02
OK-DWG-400 Pump Down Post for Waste Retention Facilities (PDF; 41 KB) 07/02
OK-DWG-401 Waste Treatment Lagoon (PDF; 38 KB) 07/02
OK-DWG-410 Poultry Carcass Compost Facility (8 Foot Bins) (PDF; 302 KB) 10/04
OK-DWG-411 Poultry Carcass Compost Facility (10 Foot Bins) (PDF; 292 KB) 10/04
OK-DWG-411-B Turkey Carcass Compost Facility (10 Foot Bins) (PDF; 337 KB) 11/06
OK-DWG-412 Swine Carcass Compost Facility (8 Foot Bins) (PDF; 308 KB) 04/03
OK-DWG-413 Swine Carcass Compost Facility (10 Foot Bins) (PDF; 304 KB) 05/03
OK-DWG-414 Poultry Dry Stack / Composter and Cakeout Storage Structure (Up to 16' high) (PDF; 387 KB) 08/05
OK-DWG-414o Poultry Dry Stack / Composter and Cakeout Storage Structure (Standard Height) (PDF; 387 KB) 08/05
OK-DWG-500 Pond - Dry Hydrant (PDF; 317 KB) 07/02

Back to Top

OK-DWG-501 Vegetated Waterway - Trapezoidal (PDF; 96 KB) 07/02
OK-DWG-502 Vegetated Waterway - Parabolic (PDF; 100 KB) 07/02
OK-DWG-503 Diversion (PDF; 101 KB) 07/02
OK-DWG-503a Level Blocked Diversion (PDF; 131 KB) 02/01
OK-DWG-510 Watering Facility, Freeze Proof Tank for Earth Dams (PDF; 127 KB) 08/04
OK-DWG-517 Heavy Equipment Tire Trough (PDF; 61 KB) 01/06
OK-DWG-518a Wildlife Guzzler - Type A (PDF; 61 KB) 09/05
OK-DWG-518b Wildlife Guzzler - Type B (PDF; 70 KB) 09/05
OK-DWG-520 Decommissioning Abandoned Water Wells (PDF; 253 KB) 12/02
OK-DWG-600 Steel Stop-Log Details (PDF; 280 KB) 10/04
OK-DWG-601 Full Round Flashboard Riser, Corrugated Metal Water Control Structure (PDF; 465 KB) 09/05
OK-DWG-601a Full Round Flashboard Riser, Welded Steel Water Control Structure (PDF; 546 KB) 02/06
OK-DWG-602 1/2 Round Flashboard Riser, Corrugated Metal Water Control Structure (PDF; 321 KB) 09/05
OK-DWG-602a 1/2 Round Flashboard Riser, Welded Steel Pipe Water Control Structure (PDF; 1.68 MB) 02/06
OK-DWG-603 Wetland Restoration Embankment (PDF; 620 KB) 09/05
OK-DWG-603a Wetland Restoration Embankment - Continuation (PDF; 31 KB) 09/04
OK-DWG-604 Inline Flashboard Pipe and Riser Water Control Structure (PDF; 405 KB) 04/06
OK-DWG-605 Reinforced Concrete Box Water Control Structure (PDF; 59 KB) 01/06
OK-DWG-606 Plug and Nipple Canopy Riser, Corrugated Metal Water Control Structure (PDF; 1.18 MB) 09/05
OK-DWG-606a Plug and Nipple Canopy Riser, Welded Steel Water Control Structure (PDF; 836 KB) 09/05
OK-DWG-607 Plug and Nipple Riser, Corrugated Metal Water Control Structure (PDF; 1.20 MB) 09/05
OK-DWG-607a Plug and Nipple Riser, Welded Steel Water Control Structure (PDF; 831 KB) 08/05
OK-DWG-610a Circular Island (Built from all sides) (PDF; 36 KB) 01/06
OK-DWG-610b Circular Island (Built from one side) (PDF; 36 KB) 01/06
OK-DWG-610c Circular Goose Island (PDF; 28 KB) 01/06
OK-DWG-611a Half Donut Island (Built from all sides) (PDF; 36 KB) 01/06
OK-DWG-611b Half Donut Island (Built from one side) (PDF; 36 KB) 01/06
OK-DWG-611c Half Donut Island (Built from one side) (PDF; 36 KB) 01/06
OK-DWG-612a Elliptical Island (Built from all sides) (PDF; 34 KB) 01/06
OK-DWG-612b Elliptical Island (Built from one side) (PDF; 35 KB) 01/06
OK-DWG-613a Half Circle Island (Built from all sides) (PDF; 35 KB) 01/06
OK-DWG-613b Half Circle Island (Built from one side) (PDF; 35 KB) 01/06
OK-DWG-613c Half Circle Island (Built from one side) (PDF; 35 KB) 01/06
OK-DWG-614a Kidney Island (Built from all sides) (PDF; 35 KB) 01/06
OK-DWG-614b Kidney Island (Built from one side) (PDF; 35 KB) 01/06
OK-DWG-614c Kidney Island (Built from one side) (PDF; 35 KB) 01/06
OK-DWG-614d Deep Water Habitat Island (PDF; 26 KB) 01/06
OK-DWG-615a Snake Island (Built from all sides) (PDF; 39 KB) 01/06
OK-DWG-615b Snake Island (Built from one side) (PDF; 39 KB) 01/06
OK-DWG-620 Excavated Swale (PDF; 38 KB) 01/06

Examples

Back to Top

Drawing Number

Drawing Title

 Date
OK-DWG-200 Drop Inlet Structure - Corrugated Metal Pipe (PDF; 106 KB) 07/05
OK-DWG-200a Drop Inlet Structure - Welded Steel Pipe (PDF; 99 KB) 02/06
OK-DWG-201 Drop Inlet Structure - CMP w/ Footing (PDF; 110 KB) 07/05
OK-DWG-201a Drop Inlet Structure - Welded Steel Pipe w/ Footing (PDF; 106 KB) 02/06
OK-DWG-203 Hooded Drop Inlet Structure - Corrugated Metal Pipe (PDF; 104 KB) 07/05
OK-DWG-203a Hooded Drop Inlet Structure - Welded Steel Pipe (PDF; 102 KB) 02/06
OK-DWG-204 Hooded Drop Inlet Structure - CMP w/ Footing (PDF; 108 KB) 07/05
OK-DWG-204a Hooded Drop Inlet Structure - Welded Steel Pipe w/ Footing (PDF; 106 KB) 02/06
OK-DWG-205 Canopy Drop Inlet Structure - CMP (PDF; 110 KB) 07/05
OK-DWG-205a Canopy Drop Inlet Structure - Welded Steel Pipe (PDF; 96 KB) 08/06
OK-DWG-206 Canopy Drop Inlet Structure - CMP w/ Footing (PDF; 112 KB) 07/05
OK-DWG-206a Canopy Drop Inlet Structure - Welded Steel Pipe w/ Footing (PDF; 96 KB) 08/06
OK-DWG-206b Canopy Drop Inlet Structure - CMP w/ Footing and Riprap (PDF; 114 KB) 09/05
OK-DWG-207a Bermless Canopy Drop Inlet Structure - Welded Steel Pipe (PDF; 101 KB) 02/06
OK-DWG-210 Canopy Inlet Structure - Corrugated Metal Pipe (PDF; 98 KB) 07/05
OK-DWG-210a Canopy Inlet Structure - Welded Steel Pipe (PDF; 88 KB) 02/06
OK-DWG-210b Canopy Inlet Structure - PVC Pipe (PDF; 96 KB) 12/05
OK-DWG-212 Horizontal Hooded Inlet Structure - CMP (PDF; 95 KB) 11/04
OK-DWG-212a Horizontal Hooded Inlet Structure - Welded Steel Pipe (PDF; 91 KB) 02/06
OK-DWG-213 Vertical Hooded Inlet Structure - CMP (PDF; 97 KB) 11/04
OK-DWG-213a Vertical Hooded Inlet Structure - Welded Steel Pipe (PDF; 92 KB) 02/06
OK-DWG-214 Embankment Structure (PDF; 77 KB) 07/05
OK-DWG-215 Filter and Drainage Diaphragm (PDF; 48 KB) 01/06
OK-DWG-217 Riprap Toe Drain (PDF; 41 KB) 01/06
OK-DWG-231 Baffle and Trash Guard Details for Drop Inlet (PDF; 41 KB) 01/06
OK-DWG-231a Trash Guard for Canopy Drop Inlet (PDF; 31 KB) 01/06
OK-DWG-231b Trash Guard for Canopy Drop Inlet w/ Riprap (PDF; 46 KB) 08/05
OK-DWG-300 Concrete Lined Outlet (PDF; 116 KB) 07/05
OK-DWG-300a Concrete Lined Outlet w/ Non-plastic Blanket (PDF; 122 KB) 07/05
OK-DWG-301 Gabion Mattress (PDF; 113 KB) 07/05
OK-DWG-302 Fabricated Corrugated Galvanized Steel Toewall Drop Spillway (PDF; 168 KB) 02/06
OK-DWG-302a Fabricated Corrugated Galvanized Steel Toewall Drop Spillway w/ Riprap Outlet (PDF; 185 KB) 02/06
OK-DWG-400 Pump Down Post for Waste Retention Facilities (PDF; 37 KB) 07/05
OK-DWG-401 Waste Treatment Lagoon (PDF; 39 KB) 07/05
OK-DWG-410 Poultry Carcass Compost Facility (8 Foot Bins) (PDF; 203 KB) 10/05
OK-DWG-411 Poultry Carcass Compost Facility (10 Foot Bins) (PDF; 196 KB) 10/05
OK-DWG-412 Swine Carcass Compost Facility (8 Foot Bins) (PDF; 204 KB) 04/06
OK-DWG-413 Swine Carcass Compost Facility (10 Foot Bins) (PDF; 199 KB) 05/05
OK-DWG-500 Pond - Dry Hydrant (PDF; 86 KB) 07/05
OK-DWG-501 Vegetated Waterway - Trapezoidal (PDF; 108 KB) 07/05
OK-DWG-502 Vegetated Waterway - Parabolic (PDF; 102 KB) 07/05
OK-DWG-503 Diversion (PDF; 108 KB) 07/05
OK-DWG-503a Level Blocked Diversion (PDF; 107 KB) 02/06
OK-DWG-517 Heavy Equipment Tire Trough (PDF; 46 KB) 01/06
OK-DWG-520 Decommissioning Abandoned Water Wells (PDF; 129 KB) 07/05
OK-DWG-600 Steel Stop-Log Details (PDF; 31 KB) 10/05
OK-DWG-601 Full Round Flashboard Riser, Corrugated Metal Water Control Structure (PDF; 116 KB) 09/05
OK-DWG-601a Full Round Flashboard Riser, Welded Steel Water Control Structure (PDF; 105 KB) 02/06
OK-DWG-602 1/2 Round Flashboard Riser, Corrugated Metal Water Control Structure (PDF; 110 KB) 09/05
OK-DWG-602a 1/2 Round Flashboard Riser, Welded Steel Pipe Water Control Structure (PDF; 106 KB) 02/06
OK-DWG-605 Reinforced Concrete Box Water Control Structure (PDF; 45 KB) 01/06
OK-DWG-606 Plug and Nipple Canopy Riser, Corrugated Metal Water Control Structure (PDF; 111 KB) 09/05
OK-DWG-606a Plug and Nipple Canopy Riser, Welded Steel Water Control Structure (PDF; 106 KB) 08/05
OK-DWG-607 Plug and Nipple Riser, Corrugated Metal Water Control Structure (PDF; 106 KB) 09/05
OK-DWG-607a Plug and Nipple Riser, Welded Steel Water Control Structure (PDF; 103 KB) 08/05

Back to Top

< Back to Technical Resources